Cookie Img
Back to top

Product Showcase
Home » Products » Paint, Powder Coating Instruments » 2 Roll Gravure Lab Coater

2 Roll Gravure Lab Coater

2 Roll Gravure Lab Coater
2 Roll Gravure Lab Coater
Product Code : E-BC12PDG
Brand Name : EUCLID
Product Description

EUCLID  2-ROLL DIRECT GRAVURE LAB COATER

 

Direct Gravure Lab Coater, 12” wide: Model#E-BC12PDG2

Direct Gravure Lab Coater, 18” wide: Model#E-BC12PDG2

Direct Gravure Lab Coater, 24” wide: Model#E-BC12PDG2

 

Optional               : Special “Removable Top Roll” Feature for quick removal of Top Rubber Roll.
Optional               : 2nd Emergency Stop Button mounted on opposite side base plate allowing easy
                                access to E-stop buttons from either side of machine.
 
·               Excellent for performing tests onto small samples, hand sheets, and can also be
                used for continuous web coating. Can also be used to  perform saturations and 2
                roll pressure tests.
 
·               Applies a uniform, consistent, and repeatable coating laydown every time.
 
·               Used for applying coatings onto papers, paperboards, films, foils, glass, etc.
 
·               Applies coatings down to as low as 1/10 of 1 micron (.000004”). High end
                thickness varies depending upon the viscosity of the coating, gravure pattern, and
                the type of substrate.
 
·               Coat weight is controlled by the specific laser engraved gravure pattern in the
                 bottom gravure roll and by the amount of air pressure that is applied to the top
                 roll (bottom roll can be changed within 5 minutes to utilize various gravure rolls, 

                 rubber rolls, or chrome rolls).
 
·               Top roll is 6” diameter x 12” wide standard neoprene rubber with air regulated vertical
                 pressure for applying downward pressure onto the bottom roll, complete with dial
                 indicators for adjusting the vertical position of the top roll in order to set a gap between
                 the top and bottom rolls if desired . Top roll is driven with a variable speed motor and
                 controller digital rpm tachometer capable of approximately 30 fpm (available in 110 or
                 220 Volt).· Bottom roll is 6” diameter x 12” wide laser engraved gravure, driven with a
                 variable speed motor and controller with digital rpm tachometer (available in 110
                 or 220 Volt, 30 rpm motor).
 
·               A Stainless Steel coating pan mounts underneath the bottom roll for holding the
                coating mixture. The bottom roll rotates in this coating pan and picks up the
                coating mixture, and then the pneumatic wiper blade meters the excess coating
                from the bottom roll. The coating that remains in the cells of the gravure roll then
                transfers directly to the substrate as it is fed between the bottom and top rolls.
 
·               All control features mount inside a control panel that also contains an Emergency
                Stop button in order to shut off all power to the machine by simply pressing down
                on the button.
 
·               Different types of rubber for the top roll including E.P.D.M., Silicone, Viton,
                Hypalon, Buna-N, Urethane, Polysulfide, and Natural Rubber are also available
 

 


KHUSHBOO SCIENTIFIC PVT. LTD.

Contact Us

( *represents compulsory fields )

Tips on getting accurate quotes. Please include product name, order quantity, usage, special requests if any in your inquiry.



Contact Details
132, Room No.23, Princess Street, Govind Building, 2nd Floor, Kalbadevi Road,Mumbai - 400002, Maharashtra, India
Key Personnel
Mr. Praveen H. Bachhawat (Managing Director)